Check out Chris Patton and his 1988 Foxbody Mustang! This build was 100% completed by him. His hometown is in Colorado, which is 9,000 feet above sea level. He says, "the Aces Joker EFI has performed flawlessly at this elevation." Here are some other details he wanted to be listed about his build: - Engine built capable North of 1000hp
- Blower 1500hp capable 27psi boost
- Ford Motorsport A-4 (R) block 340 c.i
- Cola 3.25 crank
- Eagle h beam rods
- Diamond flat top pistons
- Fully built Trick flow high port heads
- Custom comp cams blower cam
- High rev bullet lifters
- Comp cams roller rockers
- Comp cams pushrods
- Luis Cisneros with Vortech Superchargers supplied a v-3 JT trim billet wheel blower
- 525 hellcat fuel pump
- A lot of methanol by AEM
- Aces EFI Joker multi-port fuel injection system engine management system / stand alone
- Kooks / 485 Designs custom headers
- MRP Fuel Injection, LLC supplied 1050cc injectors
- 3” stainless xpipe into m-80 muflers
- MY FAVORITE PART…90s boom tubes side pipes
- Andrew J Hanlon / Hanlon motorsports supplied tkx
- Luis Cisneros with Vortech Superchargers supplied a V-3 JT trim billet wheel blowerne
This is an AMAZING Build Chris, and we are honored to display it! Thanks for sharing.
Dejar un comentario
Este sitio está protegido por hCaptcha y se aplican la Política de privacidad de hCaptcha y los Términos del servicio.